TrigMic™Gen2 kick -PA
• TrigMic™ Gen2 kick PA – professional music equipment. This is complete solution with piezo trigger and multilayer sound module
• Device fixes onto the hoop of kick drum
• Standard XLR-type connector allows to route the audio signal to the mixer console directly
• Contains a set of factory-preloaded sounds of kick drums
• User can upload own sounds
• Adjustable parameters of dynamics
• Remote control via Bluetooth
- Additional Information
- How does it work
- Content of delivery
This is professional music equipment. An integrated solution contains piezo trigger and multilayer sampler. “TrigMic™ Gen2 kick PA” attaches onto the hoop of bass drum. On the rear panel there is a standard XLR plug for audio cable, like a microphone. Pulse detector traces the stroke rapidly and estimates the force. Builtin sound module generates pre-loaded sounds from internal memory. It gives minimal delay from the stroke to playback the sample. Volume of playback is depending of stroke force. Sample player organized as multilayer polyphonic mechanism (up to 8 layers and 4 voices). Adjustable GAIN and RESPONSE allows to achieve a better dynamic for most comfortable play. FILE button allows to change sounds. Bluetooth features allows to control device remotely. User may upload new sounds, configure device and adjust thin settings.
|Dimensions||15 x 13 x 6 cm|
The piezoelectric transducer is leaning onto the drumhead. This transducer detects mechanical vibrations at the moment of stroke and converts them to the electrical signal. The internal electronic circuit processes this signal and extracts information about the fact and force of stroke. These parameters directed to the internal sound module as commands. Sound module makes the playback of pre-recorded waveform from memory and pass the audio signal to the output plug.
Type of pickup - Piezo, replaceable
Audio format - 44100Hz 24Bit Mono
Output level, max - 250mV peak (-10dBu)
Supply - One AA cell (1.2 to 4.4V)
Number of Files - up to 5 per bank
Number of Banks - 2
Case dimensions (LxWxH) - 4 x 1.5 x 4 in
Weight with battery cell - 200g
Smart trigger TrigMic Gen2 kick PA - 1 pc.
Piezo head - 1 pc. (pre-installed)
Neoprene cover - 1 pc.
User manual - 1 pc.
Cardboard packing box - 1 pc.